Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
  • Call us on 346-333-6500
  • My Account
  • Gift Certificates
SMW3D

Wires & Connectors

Help all those electrons meet their destination. 

  • Flexible PET Sheathing to bundle wires.

    10mm Expandable sleeving $0.99

    The ultimate in cleaning up your build! Once you have made your wiring harnes with this wire and these connectors, dress up and protect these works of art! PTFE expandable braided sleeving comes in black, white, purple,...

  • 22 gauge wire for endstops, motors, and sensors

    22 gauge wire for endstops, motors, and sensors $0.50

    Tired of electrical tape and heat shrink tubing? Ok, grab some of this 22 gauge wire that comes in 4 wire strips and sold by the foot, and all will look professional.  Can be seperated to be 2 or 3 wire combinations and...

  • Cable Chain

    Cable Chain $12.40

    Cable chains, sometimes referred to as energy chains, assist to keep your wires our of moving and rotating components.  Specs: Plastic construction Typical length is 1 meter Capable of being shortened Dimensions...

  • 2.54mm Dupont connectors

    Dupont 2.54 connector housings and pins $0.15

    Make your own wiring harness. Rid your build of electrical tape and loose connections. These Dupont 2.54 mm connectors used along with SMW3D's Crimp tool and wire will make your build look professional. The 2.54mm...

  • Heat Shrink Tubing Assortment

    Heat Shrink Tubing Assortment $1.25

    Sold by the foot this little pack includes 600V 125C: 2mm 3mm 6mm and 8mm heat shrink tubing. This should cover almost any...

  • Kapton Tape

    Kapton Tape $2.75

    Katon tape is to the CNC and 3D open cource community as duct tape is to the rest of the world.  Specs: Available in 15mm and 200mm width Short term heat resistance 300C Long term heat resistance 250C (this means it...

  • Plastic stand-off

    Plastic stand-off $0.25

    These little plastic stand-offs are a necessity for those precious electronics. The control board needs to be lifted off the metal frame to avoid continuity between poles and most likely needs some space for cooling. These...

  • RAMPS wiring kit

    RAMPS wiring kit $17.99

    The RAMPS wiring kit comes with 9 wiring harnesses that are 24 gauge wire, 70cm long per lead: 2 x 2 pole (one hotend thermistor, one bed thermistor) 3 x 3 pole (three endstops) 4 x 4 pole (four stepper motors) The kit...

  • Screw Type Connector

    Screw Type Connector $0.12

    1. L Type 3 pin 5.08mm Pitch Screw Terminal Block Connector Male and Female included 2. L type 3 pin 6.35mm Pitch Screw Terminal Block Connector Wire Cage Type  3. L type 6 pin 5.08mm Pitch Screw Terminal Block...