M5 and M3 screws and nuts to hold your project together.
When the two ends of your belt meet you must secure them somehow to ensure the tension remains in your drive system. This is a great solution, run the two belt ends together and bend the sides down of this clip to get a...
Black Self Tapping Screws
A black, .75" long, 10-16 threaded self tapping screw.
A double T-nut makes extending your project a breeze. Use two M5 or 5mm set screws, slide between the joints, and tighten. The rails will align perfectly, allowing a V-wheel to run smoothly over the transition...
Have the build complete using V-Slot and need to add something mid rail? Drop in T-nuts to the rescue.
Simply drop the T-nut into the rail and insert a M5 screw, turn a couple of threads and the drop in T-nut will...
Hidden Corner Fastener
A really nice way to join two pieces of V-Slot on a 90 degree angle. Slide one side into the end of a piece of V-Slot, tighten the set screw and then follow for the next piece of V-Slot. (Does not include M4 set...
M3 Cap screws
A large selection of M3 cap screws to use on your project. These are the guys that fit into stepper motors and work perfect with endstops.
M4 screws .7mm pitch to get your project bolted together.
These screws may be black or blue in color...
Use these M5 screws to put your project together. Sold individually and in various sizes to help get everything together. In less specified these are low profile heads...
M5 spring loaded T-Nut
The spring loaded T-nut has an M5 thread and is great when your build is complete and you need to add something mid-rail. Slide this in the open slot on V-slot and it will stay in place, waiting for the M5 bolt...
Nylon Hex Locknut
Lock nuts, they just work! M3 x .5mm pitch M4 x .7mm pitch M5 x .8mm...
These little plastic stand-offs are a necessity for those precious electronics. The control board needs to be lifted off the metal frame to avoid continuity between poles and most likely needs some space for cooling. These...
Spindle clamp for CNC
Once you have your CNC frame built this will the item required to hold your spindle on. Adjustable clamp fits an inner diameter of 2-1/16" to 3”. Use this clamp to hold the 52mm quiet cut spindle in the quick and dirty...
Spoiler board nut
These are great little nuts to use on an OX or CNC of your making. Drill a 1/4" hole in your spoiler board, hammer in, and use 1/4"-20 bolt or an 8mm bolt to fasten down your work piece...
Stainless Steel Set Screws
About every size set screw you will need for your project, in stainless steel!
These T-Nuts slide into your extruded aluminum frame and allow you to attach anything you want without hassle of twisting...
A great way to secure your plastic work piece by using heat. Heat up brass insert and install into area needed follow with a threaded screw to secure your work piece. Check out our hardware selection for matching fasteners...
All prices are in USD. © 2017 SMW3D | Sitemap