Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
  • Call us on 346-333-6500
  • My Account
  • Gift Certificates
SMW3D

Plates & Mounts

Building Plates for V-Slot and C-Beam.

Once you have your extruded aluminum, these plates will help you attach all the cool stuff to it. 

  • 2 Hole Flat Joining Strip

    2 Hole Flat Joining Strip $1.99

    4mm thick joining strip allows you to connect two pieces of extruded aluminum with ease! 40 x 18 x 4mm 6105...

  • 20 x 20 small gantry plate

    20 x 20 small gantry plate $6.29

    This little guy is used to create a linear motion platform on your V-slot rail. Similiar to the universal gantry plate that will fit 20 to 80mm widths of V-slot, this smaller form factor only fits the 20mm side. A great way...

  • 5-Hole corner joints for extruded aluminum

    5-Hole corner joints for extruded aluminum $4.99

    Once you have your design planned out, use the 90 degree corner brackets to create a rigid frame...

  • 8mm ACME BLock

    8mm ACME BLock $7.49

     Add this block to any project to change rotational motion to linear motion. Inner threaded hole matches the 8mm ACME thread sold here or any 2mm pitch 8mm diameter ACME screw...

  • 8mm ACME Nut Plate

    8mm ACME Nut Plate $6.99

    This little plate from OpenBuilds allows one to attach and control the four start ACME screw. The block is intended to attach to the end of a piece of OpenBuild's V-slot.

  • 90 degree angle solid bracket

    90 degree angle solid bracket $2.99

    A solid 90, black anodized, fits extruded aluminum and wheels. 

  • C-Beam Actuator end Plates

    C-Beam Actuator end Plates $8.99

    Use these finely machined plates to hold everything tightly together on the C-Beam. The inside has a recess hole for a 688ZZ bearing that will retain the ACME screw, the other side has recessed holes for the mounting bolts...

  • C-Beam Double Wide Gantry plate

    C-Beam Double Wide Gantry plate $13.99

    Standard C-Beam gantry plate simply not big enough to mount everything? OpenBuilds has answered with the double wide plate.  Stack 8 Mini V Wheels on this plate to create a rigid yet smooth connection on the inside of...

  • C-Beam Gantry Plate

    C-Beam Gantry Plate $9.99

    The C-Beam gantry plate is designed to use on the C-Beam and includes all the holes you could possibly want to attach all the great goodies from OpenBuild's product line.  A recess is provided so that you can add an...

  • C-Beam Riser Blocks

    C-Beam Riser Blocks $5.99

    In your design you may need to lift the object your moving off the C-Beam build plate. These blocks will do exactly that. The blocks come in a set of two and will allow a debris block to be mounted (coming soon) to the...

  • Cast Aluminum 90 degree brackets

    Cast Aluminum 90 degree brackets $1.50

    The cast 90 degree corner bracket adds great stability to a corner where T-slot or V-slot meets. Measures 20mmx20mmx17mm and is mounted with T-nuts and M5X8mm screws. 

  • Cross Joining Plate

    Cross Joining Plate $5.99

    This plate is used where you might need a rigid 4 way connection. 5mm thick with a hole pattern to fit the V-slot perfectly. 

  • Cube Corner Connector

    Cube Corner Connector $3.49

    A convenient way to join 20mm V-Slot aluminum. This cube connector is milled out of solid aluminum and given a sleek black anodizing, preserving the look of your machine without sacrificing its functionality...

  • Idler pulley plate

    Idler pulley plate $6.99

    Use this plate to hold the idler pulley opposite your dirve pulley. Bolts directly to your V-slot to provide perfect belt tension.    Everything shown comes in the...

  • Limit switch plate for V-Slot

    Limit switch plate for V-Slot $2.00

    Why not have adjust ability in your limit switches? This great little plate allows you to fine tune exactly where your limit switch will be. Works perfectly with any surface, but best mounted in V-slot or any T-slot,...

  • Mini V-wheel plate

    Mini V-wheel plate $8.99

    When you have use for the mini V-wheel application this plate will allow for endless mounting capability.  

  • Nema 17 Mounting L Bracket

    Nema 17 Mounting L Bracket $4.25

    Mount your Nema 17 motor without having to worry about belts getting loose. This L mounting bracket has two slots to allow for play in mounting position.

  • Nema 23 Motor Mount

    Nema 23 Motor Mount $7.50

    Mount your Nema 23 motors using this sleek, black mount. Access cutout for easy access to coupler. Motor not included.

  • OpenBuild's Nema 17 Motor Mount

    OpenBuild's Nema 17 Motor Mount $6.95

    Now that you have your frame built, add a motor anywhere along the frame you would like. Fits Nema 17 and 14 frames. Black 6063 T5 1/8”...

  • OpenBuilds Spacer Block

    OpenBuilds Spacer Block $3.99

    Use this nifty spacer block to offset your V-Slot build plate to allow room for belts and wires.

  • T Joining Plate

    T Joining Plate $4.65

    In designing your build if you have a need to make a T connection, for a support leg for instance, this plate will provide a rigid connection. 

  • Threaded Rod Plate

    Threaded Rod Plate $6.99

    This threaded rod plate is designed to center the 8mm ACME threaded rod for stability. Used on the Shapeoko this plate is 6063 -T6 with black anodized finish and fits the V-slot profile perfectly...

  • Universal L bracket

    Universal L bracket $1.29

    Use these "L" brackets to secure two pieces of V-slot or T-slot together in 90 degree corner. The single would be used on 20x20, double on 20x40, triple on 20x60. 

  • V-Slot Actuator End Mount

    V-Slot Actuator End Mount $10.99

    Ready to drive your V-Slot built project? These are a perfect solution for attaching Nema 17 motors and smooth idler pulleys. Fits all sizes of V-slot.   

  • V-Slot Build Plate

    V-Slot Build Plate $18.99

      This build plate allows you to attach all the cool peripherals to your V-slot based project. The hole spacing will accept eccentric spacers as well as fasteners and fits 20X20mm to 20X80mm V-slot...

  • V-Slot End Cap

    V-Slot End Cap $1.99

    Give your V-Slot project a cleaner, more stunning, finishing touch with this beautiful black anodized aluminum end cap. Stack-able so it will fit all sizes. 

  • V-slot gantry plate

    V-Slot gantry plate $12.00

    Once you have designed and built your frame you will want to mount your hotend (for 3D printing) or spindle (for CNC work). This is the plate you need! The V-slot gantry plate fits all sizes of V-slot and the holes are...