Bits & Endmills for your DIY CNC.
1/8 inch engraving bit
This engraving bit is great for soft woods and aluminum engraving. Use this if you plan on adding text or something that requires sharp, small lines. Specs: AlTiN coated Shank 3.175mm Cutting edge diameter .2mm...
3.175 mm (1/8 inch) CNC engraving bit set
This engraving set is 5 pieces, has an edge diameter of .2mm and the end angles of 20, 30, 45, 60, and 90 degrees. You use these to create amazing things in softer materials where an end mill is simply too big. These are...
Carbide Single Flute Up Cut End Mills
We provide a variety of end mills for your CNC use. Carbide up cut single flute end mills will have no problems cutting through aluminum or any soft metals you may want to cut. The 4mm single flute is SMW3D's...
Carbide Two Flute Square Up Cut End Mill
SMW3D's selection of high quality square end two flute carbide coated end mills. Most of the selection provided are Alcrona Pro coated providing superb heat resistance and long tool life. Use the two flute when one needs to...
CNC and tool mist block
Use this adjustable, versatile mister to prevent endmills, drill bits, and other rotational tools from over heating and ruining your tool and work piece.
adjustable hose and nozzle
mounting holes for mister and water...
Once you have picked up a spindle, there is no reason to be limited to a 1/8" tool. These ER11 collets are available from 3mm diameter to 6mm diameter.
Also add a spare ER11-A nut
This is not...
Straight Two Flute End Mill
A straight flute endmill is great for very soft materials such as foam, plywood and other materials that an angled upcut endmill would tear easily.
All prices are in USD. © 2018 SMW3D | Sitemap