Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
  • Call us on 346-333-6500
  • My Account
  • Gift Certificates
SMW3D

All Products

Everything we have in the store!  Don't feel like browsing by category, find it all right here!

  •  Water Pump 110V

    Water Pump 110V $38.48

    When over heating is a factor for losing function of your machine, turn to the 110v water pump to cool your tool. This is the very water pump used by SMW3D on our production R7 CNC router's 800W...

  • 1.75mm Bowden Tubing

    1.75mm Bowden Tubing $0.99

    The bowden tubing is sold in 100mm sections. What is a Bowden feed? A quick explanation:  In the realm of 3D printing there are two separate ways to get your filament to the hotend. One is right out of a motor with a...

  • 1/8 inch engraving bit

    1/8 inch engraving bit $4.99

    This engraving bit is great for soft woods and aluminum engraving. Use this if you plan on adding text or something that requires sharp, small lines.    Specs: AlTiN coated Shank 3.175mm Cutting edge diameter .2mm...

  • 10A 250v Inlet Module Plug Power Socket

    10A 250v Inlet Module Plug Power Socket $4.99

    Give your build a clean look as well as an on/off switch by adding an inlet for easy control.    Note: Wiring required, Fuse not...

  • Flexible PET Sheathing to bundle wires.

    10mm Expandable sleeving $0.99

    The ultimate in cleaning up your build! Once you have made your wiring harnes with this wire and these connectors, dress up and protect these works of art! PTFE expandable braided sleeving comes in black, white, purple,...

  • 110V Power Inverter

    110V Power Inverter $158.10

    Nowforever 110V AC Inverter for 800W spindle. Set spindle speed direction Read voltage and amperage Adjust spindle speed on face pot Read spindle Hz Removable face with remote strap 15A output Single phase...

  • 1204 Ball screw Nut Housing

    1204 Ball screw Nut Housing $19.00

    A solid way to secure your moving part to the ball screw on your machine. One center hole to house the ball screw, six tapped holes to secure the flange nut, and four tapped holes on the side to get your part moving...

  • 12VDC Heater Cartridge

    12VDC Heater Cartridge $10.99

    A 12VDC 40W heater cartridge with one meter leads. These are used in a number of hotends. High power ceramic heater cartridge with silicon insulated high temperature wires. 

  • 2 Hole Flat Joining Strip

    2 Hole Flat Joining Strip $1.95

    4mm thick joining strip allows you to connect two pieces of extruded aluminum with ease! 40 x 18 x 4mm 6105...

  • 2-Wire Fan (5V, 12V or 24 volt DC)

    2-Wire Fan (5V, 12V or 24 volt DC) $7.50

    These are great little fans to keep you cool. The fan's shaft rides on two ball bearings to provide a long service life. Fits the E3D V5 and V6 and available in 12 and 24VDC!   There also a 5V available for those low...

  • 20 x 20 small gantry plate

    20 x 20 small gantry plate $6.00

    This little guy is used to create a linear motion platform on your V-slot rail. Similiar to the universal gantry plate that will fit 20 to 80mm widths of V-slot, this smaller form factor only fits the 20mm side. A great way...

  • 20mm X 20mm X 10mm fan

    20mm X 20mm X 10mm fan $5.99

    This little guy is perfect where you do not have space and do not need massive air flow. Great for hanging off of hotends and boards.  20mm x 20mm x10mm 5 VDC .08 A 3 wire (center is for PWM) but can be used on two...

  • 22 gauge wire for endstops, motors, and sensors

    22 gauge wire for endstops, motors, and sensors $0.50

    Tired of electrical tape and heat shrink tubing? Ok, grab some of this 22 gauge wire that comes in 4 wire strips and sold by the foot, and all will look professional.  Can be seperated to be 2 or 3 wire combinations and...

  • 24VDC Heater Cartridge

    24VDC Heater Cartridge $10.99

    A 24VDC 40W heater cartridge with 1 meter leads. These are used in a number of hotends. High power ceramic heater cartridge with silicon insulated high temperature wires.    If you have ordered an E3D and have a...

  • 3.0mm Bowden Tubing

    3.0mm Bowden Tubing $0.99

      The bowden tubing is sold in 100mm sections. ID: 3.175mm OD: 6.35mm What is a Bowden feed? A quick explanation:  In the realm of 3D printing there are two separate ways to get your filament to the...

  • 3.175 mm (1/8 inch) CNC engraving bit set

    3.175 mm (1/8 inch) CNC engraving bit set $14.99

    This engraving set is 5 pieces, has an edge diameter of .2mm and the end angles of 20, 30, 45, 60, and 90 degrees. You use these to create amazing things in softer materials where an end mill is simply too big. These are...

  • 5 Hole T Joining Plate

    5 Hole T Joining Plate $4.65

    In designing your build if you have a need to make a T connection, for a support leg for instance, this plate will provide a rigid connection. 

  • 5-Hole corner joints for extruded aluminum

    5-Hole corner joints for extruded aluminum $4.80

    Once you have your design planned out, use the 90 degree corner brackets to create a rigid frame. ...

  • 7 Hole Cross Joining Plate

    7 Hole Cross Joining Plate $5.95

    This plate is used where you might need a rigid 4 way connection. 5mm thick with a hole pattern to fit the V-slot perfectly. 

  • 800w Spindle

    800w Spindle $210.00

    More powerful than the 300W-400W quiet cut spindle, the 800W spindle will carve through aluminum like a hot knife through butter. Comes in 110V. 110V spindle motor ER-11 Collet Comes with 3.175mm Collet Operating RPM...

  • 8mm ACME BLock

    8mm ACME BLock $6.50

     Add this block to any project to change rotational motion to linear motion. Inner threaded hole matches the 8mm ACME thread sold here or any 2mm pitch 8mm diameter ACME screw...

  • 8mm ACME Nut Plate

    8mm ACME Nut Plate $6.25

    This little plate from OpenBuilds allows one to attach and control the four start ACME screw. The block is intended to attach to the end of a piece of OpenBuild's V-slot.

  • 8mm ACME Screw

    8mm ACME Screw $9.99

    TR8X8, 4 start, 2mm pitch, 8mm lead ACME screw. This is the way to add precise drive to your system. The pitch is the perfect balance between speed and torque for changing rotational motion to linear. Perfect for CNC and 3D...

  • 8mm ID Flanged self-lubricating bronze bushing with shoulder

    8mm ID Flanged self-lubricating bronze bushing with shoulder $0.70

    This self-lubricating bronze bushing is a great drop-in replacement for a linear bearing where space is a factor. The shoulder allows a resistance to be placed in one direction.  Use this on our 8mm rods. Specs: ID...

  • 8mm ID self-lubricating bearing

    8mm ID self-lubricating bearing $0.90

    A self lubricating bushing to use on an 8mm rod. These can provide a nice solution where weight is a factor. The bushing offers a maintenance free method of linear motion.  Specs: 8mm ID 12mm OD 15mm...

  • 90 degree angle solid bracket

    90 degree angle solid bracket $2.25

    A solid 90, black anodized, fits extruded aluminum and wheels. 

  • ACME Anti-Backlash Nut

    ACME Anti-Backlash Nut $14.99

    SMW3D is very excited about this product! Use this anti-backlash nut with our Tr8*8 ACME thread (http://www.smw3d.com/8mm-acme-screw/ ) to change rotational motion into secured linear motion. SMW3D searched the globe to...

  • Aluminum Extruded V-Slot from OpenBuilds

    Aluminum Extruded V-Slot from OpenBuilds $3.00

    If you are building a 3D printer or a CNC this is the place to start!   If you are building a house the first place you would start is the design, next would be the building materials. This is the building material...

  • Aluminum Spacers

    Aluminum Spacers $0.20

    Use these spacers to seperate your wheels, plates, or whatever your project desires from your frame. Fit snuggly to a M3, M4, or M5 bolt to create a rigid connection.  We carry a large variety of lengths!...

  • ARRIS Mi600s Video Transmitter

    ARRIS Mi600s Video Transmitter $72.99

    MI600s is the second generation of 5.8G FPV video transmitters. The frequency is upgraded to 32ch making it compatable with all receivers on market.   Features:  Perfect signal transmission from the super compact...

  • Atomic PLA 1.75mm

    Atomic PLA 1.75mm $29.99

    Filament comes in shapes and sizes. Atomic PLA filament offers richer colors, high strength, accurate dimensions, and overall better performance. Why settle for less when you can treat your printer with...

  • Atomic Translucent PLA 1.75mm

    Atomic Translucent PLA 1.75mm $29.99

    Filament comes in shapes and sizes. Atomic PLA filament offers richer colors, high strength, accurate dimensions, and overall better performance. Why settle for less when you can treat your printer with...

  • Azteeg X3

    Azteeg X3 $110.00

    The Azteeg X3 is a full featured, easy to use 3D printer Electronics powered by the reliable and powerful Atmel ATMEGA2560 micro controller.The X3 is designed with excellent high current capability to run most 3D printer...

  • Azteeg X5 GT

    Azteeg X5 GT $110.00

    The X5 GT is a 32 bit ARM based Motion controller for 3D printers, CNC Machines and Laser cutters. The X5 GT runs on Smoothieware firmware and is based on Smoothieboard. The X5 GT uses the powerful 32bit, 120Mhz...

  • Azteeg X5 Mini V3

    Azteeg X5 Mini V3 $113.00

    The X5 mini V3 is a 32 bit ARM based Motion controller for 3D printers, CNC Machines and Laser cutters. The X5 mini runs on Smoothieware firmware and is based on Smoothieboard. The X5 mini uses the powerful 32bit,...

  • Ball Screw Support Bearing

    Ball Screw Support Bearing $30.00

    If you're running a linear motion system using ball screws, you're going to need ball screw support bearings for a smoother ride.   FK8: Product Model:  FK8   Structure:  Ball Screw...

  • Belt Clamp

    Belt Clamp $0.60

    When the two ends of your belt meet you must secure them somehow to ensure the tension remains in your drive system. This is a great solution, run the two belt ends together and bend the sides down of this clip to get a...

  • Bigfoot BSD109A Stepper Driver

    Bigfoot BSD109A Stepper Driver $12.00

    The BSD109A is a bi-polar stepper driver board using the new Bigfoot profile which is twice the size of the regular pololu style drivers used in 3D printers and CNCs. The BSD109A is controlled using Step and Direction...

  • Black Self Tapping Screws

    Black Self Tapping Screws $0.25

    A black, .75" long, 10-16 threaded self tapping screw.  

  • Block & Sock - V6 Upgrade Kit

    Block & Sock - V6 Upgrade Kit $36.00

    Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Sock & Thermistor Cartridge Block. V6 cartridge-style heater block Silicone Sock V6 (x3) The new cartridge thermistor Thermistor...

  • BondTech QR

    BondTech QR $155.28

    Most of us have a love/hate relationship with our printers. The first print after a long assembly process, that perfect gift coming out amazing and the extruder moving to the side after a successful 36 hour print all make us...

  • Standard Mount for Bondtech QR

    Bondtech QR Mount $7.00

    This Bondtech QR Mount is made to fit, of course, the Bondtech QR 3D printer extruder. Securely mount your Bondtech to your printer with one (or more) of these carefully printed mounts...

  • C Beam Gantry Plate XL

    C Beam Gantry Plate XL $14.95

    C Beam Gantry Plate XL     A strong 6mm thick aluminum 6061- T5 plate Mates at 90 degrees to another plate allowing for the best in an XY and Z system Shiny black anodized for a finished look Recessed screw...

  • C-Beam Actuator Bundle 250mm Length

    C-Beam Actuator Bundle 250mm Length $97.50

    What an exciting time to be a builder! The kit shown here is for the 250mm bundle. An instructional page can be found here to help you get well on your way. The OpenBuild's Linear Actuator Bundle provides...

  • C-Beam Actuator end Plates

    C-Beam Actuator end Plates $8.75

    Use these finely machined plates to hold everything tightly together on the C-Beam. The inside has a recess hole for a 688ZZ bearing that will retain the ACME screw, the other side has recessed holes for the mounting bolts...

  • C-Beam Double Wide Gantry plate

    C-Beam Double Wide Gantry plate $13.95

    Standard C-Beam gantry plate simply not big enough to mount everything? OpenBuilds has answered with the double wide plate.  Stack 8 Mini V Wheels on this plate to create a rigid yet smooth connection on the inside of...

  • C-Beam Gantry Plate

    C-Beam Gantry Plate $9.40

    The C-Beam gantry plate is designed to use on the C-Beam and includes all the holes you could possibly want to attach all the great goodies from OpenBuild's product line.  A recess is provided so that you can add an...

  • C-Beam Linear Actuator Bundle 1000mm Length

    C-Beam Linear Actuator Bundle 1000mm Length $139.95

    What an exciting time to be a builder! The kit shown here is for the 1000mm bundle. An instructional page can be found here to help you get well on your way. The OpenBuild's Linear Actuator Bundle provides everything...

  • C-Beam Linear Actuator Bundle 500mm Length

    C-Beam Linear Actuator Bundle 500mm Length $114.95

    What an exciting time to be a builder! The kit shown here is for the 500mm bundle. An instructional page can be found here to help you get well on your way. The OpenBuild's Linear Actuator Bundle provides...

  • Cable Chain

    Cable Chain $12.40

    Cable chains, sometimes referred to as energy chains, assist to keep your wires our of moving and rotating components.  Specs: Plastic construction Typical length is 1 meter Capable of being shortened Dimensions...

  • Carbide Single Flute Up Cut End Mills

    Carbide Single Flute Up Cut End Mills $12.99

    We provide a variety of end mills for your CNC use. Carbide up cut single flute end mills will have no problems cutting through aluminum or any soft metals you may want to cut. The 4mm single flute is SMW3D's...

  • Carbide Two Flute Square Up Cut End Mill

    Carbide Two Flute Square Up Cut End Mill $11.99

    SMW3D's selection of high quality square end two flute carbide coated end mills. Most of the selection provided are Alcrona Pro coated providing superb heat resistance and long tool life. Use the two flute when one needs to...

  • Cast Aluminum 90 degree brackets

    Cast Aluminum 90 degree brackets $1.50

    The cast 90 degree corner bracket adds great stability to a corner where T-slot or V-slot meets. Measures 20mmx20mmx17mm and is mounted with T-nuts and M5X8mm screws. 

  • CC3D Flight Controller

    CC3D Flight Controller $14.99

    The so-called brains of the operation, CC3D flight controllers are a multiroter controller ready to take you anywhere! Comes in two models, CC3D and CC3D Mini. CC3D:  Weight: 5.7g Dimensions: 36x36mm Mounting: M3 holes...

  • Centrifugal Fan

    Centrifugal Fan $7.50

    These fans are great to mount anywhere you have a lack of space and need a constant flow of air.  50mm x 50mm x 15mm is a 12V fan 40mm x 40mm x 20mm is a 24V fan shaft rides on ball bearings "squirrel cage" design,...

  • Ceramic Screw Driver

    Ceramic Screw Driver $7.99

    So why would you need a ceramic screw driver?    When setting the current on stepper sticks, the trim pot is completely metal and will short out if you use a standard metal screw driver.    Enter this...

  • CNC and tool mist block

    CNC and tool mist block $25.99

    Use this adjustable, versatile mister to prevent endmills, drill bits, and other rotational tools from over heating and ruining your tool and work piece. adjustable hose and nozzle mounting holes for mister and water...

  • CO2 Laser Air Assist Nozzle

    CO2 Laser Air Assist Nozzle $65.00

    Keep dust from getting on your lens, keep your work piece from catching fire, and keep a clean area for greater precision. These are all perks every laser enthusiast want. If cleaner cuts appeal to you, you're going to want...

  • CO2 Laser Mirror

    CO2 Laser Mirror $25.99

    As one of the most important parts in the laser light transmission system, no laser is complete without mirrors.  In the Co2 laser light path, the reflection mirror has two roles. It can be a rear mirror in the laser...

  • 50W PSU

    CO2 Laser Power Supply $130.00

    Please read the description carefully and choose the correct power supply for your CO2 laser tube.    40W Power your laser system with this durable, compact, and shiny blue 40w power supply. Need a replacement...